Fusion Dual 2.5" SSD RAID PCIe Card
Please click the arrow next to the category to expand or collapse:
Driver (1)
IDDownload TitleDownload LinkPost Date
977 Allegro USB 3.2 (3.1) Gen 2 (10Gbps) PCIe Driver for Windows 7 1.16.59.1Jun-11-2020
Operating System Requirements: Windows 7 (32-bit), Windows 7 (64-bit), Windows Server 2008 R2 (64-bit)
Description: Installation of this software provides support for Sonnet's Allegro USB-C PCIe, Allegro USB-C 4-Port PCIe, Allegro Pro Type-A USB 3.2 PCIe and Fusion Dual 2.5" SSD RAID PCIe cards in computers running Windows 7, Windows 7 x64 Edition, and Windows Server 2008 R2 x64.

This driver does not support Windows 8.1 or Windows 10, which have inbox drivers for these cards.
 
 
Firmware (0)
Manual (1)
FAQ (12)
IDArticle TitlePost Date
756 Do the Sonnet USB 2.0 or USB 3 cards support the Apple SuperDrive?Apr-02-22
None of Sonnet's Cards with USB 2.0 or USB 3 (either Type A or Type C) ports support the Apple SuperDrive. You must use a built-in USB 2.0 or 3.0 port on your Mac.

According to http://support.apple.com/kb/HT5630, "The Apple USB SuperDrive is compatible with Mac models from 2008 and later that don't have a built-in optical drive."
 
933 What versions of macOS support Allegro USB 3 cards?Apr-02-22
All Sonnet Allegro (and Fusion Dual 2.5" SSD RAID) PCIe Cards use a macOS pre-installed driver.

These cards are compatible with macOS 10.10 in the MacPro 3,1; 4,1 & 5,1 and in Thunderbolt 2 Expansion chassis.

These cards are not compatible with macOS 10.11, due to a bug in the Apple driver.

These cards are compatible with macOS 10.12 (2)-10.14 in the MacPro 5,1 and in Thunderbolt 2 & 3 Expansion chassis.

These cards are compatible with macOS 10.15-macOS 12 in the 2019 Mac Pro and in Thunderbolt 2 & 3 Expansion chassis.
-------------------------------------------------------------------------------------------------------------------------
Notes:

- These cards are not compatible with Thunderbolt 1 expansion chassis.

- macOS 10.12 erroneously reports a 5Gbps connection when connected at 10Gbps.

- The maximum Apple-supported OS for the Mac Pro 3,1 and 4,1 is OS X 10.11. Dosdude1 offers patchers to allow installation of newer versions of macOS. The Apple USB 3 driver in these patched newer versions will support the Allegro cards.

- Performance of the Allegro cards may be limited by the Mac Pro 5,1 PCIe 2.0 bandwidth.


 
956 What generations of Thunderbolt chassis do Sonnet Allegro PCIe cards support?Apr-02-22
976 In a Mac Pro, the SSDs are seen as external drives, how do I prevent accidental ejects?Feb-14-23
992 The write speed of my Samsung 830, 840, 840 EVO, 840 PRO, 850 EVO or 850 PRO has slowed to below 100MB/s.Mar-30-20
1096 Does the Fusion Dual 2.5" SSD support 15mm 2.5" SATA/SAS hard drives?Mar-30-20
1097 The Fusion Dual 2.5" SSD RAID PCIe card gives an macOS error message upon wake from sleep.Mar-30-20
1099 What makes Sonnet USB 3.2 Cards more reliable than other USB 3 cards?Apr-02-22
1108 If I want to make a RAID 0 configuration across two cards (four SSDs), how should I do it?Aug-10-20
1109 How do I detect and replace a failed SSD in RAID 1 mirror mode?Aug-13-20
1136 How can I use my new SSD volume to hold my user folder on macOS?Feb-14-23
1183 The Write performance of my SSD is very slow under Windows.Feb-14-23