| ID | | Article Title | Post Date |
|
871 | 
| I can't boot over 10GE from my cylinder Mac Pro. | Nov-29-15 |
| Please upgrade the EEPROM firmware adapter using the following instructions. This upgrade will address the Mac Pro cylinder boot issue.
For Mac OS X customers upgrading in the field:
1) Install the Mac OS X Myri10GE driver.
2) Download the myri-eeprom-1.4.59.mcp2 and the mac myri-tools tarball.
https://www.myricom.com/pub/10g-tools/myri-eeprom-1.4.59.mcp2
https://www.myricom.com/pub/10g-tools/mac-10g-toolkit.tgz
3) Untar the mac myri-tools tarball.
4) Run 'sudo sysctl -w net.myri10ge.enX.enable_10gtools=1' where enX is the name of device for the Myricom adapter.
For more details, please read the FAQ entry:
https://www.myricom.com/software/myri-10g-network-adapter-tool-kit/846-do-you-provide-myri-info-and-ze-upgrade-for-mac-os-x.html
5) Run 'sudo ze-upgrade myri-eeprom-1.4.59.mcp2' and reboot.
If there is a verification failure with the ze-upgrade command, please re-run the command. |
| |
|
993 |
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
| Go to System Preferences...Network.
Select the 10GbE port and click "Advanced..."
Select the Hardware tab.
If Jumbo packets are on, turn them off, click OK and click Apply.
If that fixes the problem, then stay at Standard (1500), or check the Jumbo packet setting of every switch and device in the path.
If that doesn't fix the problem, check Flow Control.
If Flow Control is off, turn it on; or if it is on, turn it off. Not all devices support flow control, or the absence of flow control. |
| |
|
994 | 
| My Twin10G or Presto 10GbE is not working on macOS. | Dec-22-19 |
|
1065 |
| I'm getting very slow performance with my Presto 10G PCIe card or Twin10G Thunderbolt 10G adapter with OS X 10.11-10.12. | Dec-22-19 |
| |
