| ID | | Article Title | Post Date |
|
808 | 
| What 10GBase-T switches and PCIe cards has Sonnet tested for interoperability? | Dec-22-19 |
| Sonnet has completed the Apple and Intel certification tests and is compatible with all mainstream 10GBASE-T switches and PCIe cards. |
| |
|
809 |
| What reasonably-priced 10GBASE-T switches can Sonnet recommend? | Dec-22-19 |
| Sonnet has found the 10GBASE-T NETGEAR ProSAFE XS708E 8-port, and ProSAFE XS712T 12-Port 10-Gigabit Smart Switches to be a cost-effective, yet high-performance switches. They supports comprehensive networking features such as VLAN, QoS, IGMP and MLD snooping, L2+ Static Routing, Link Aggregation, ACL, and IPv6 management. The ProSAFE series has an easy-to-use web management GUI, and can be daisy-chained for expansion. |
| |
|
814 | 
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
972 |
| After I upgraded macOS, the Twin10G, Presto 10GbE, or other Sonnet PCIe card that requires a driver is not loading. | Dec-22-19 |
| If you have already installed a Sonnet Driver and it is not loading:
1) Restart (forces Mac OS to scan for unloaded drivers).
2) Go to System Preferences...Security & Privacy panel...General tab. You will see a message, "System software from developer "Sonnet Technologies" was blocked from loading." Click Allow. Note that you must have a hard-wired mouse/trackpad to click allow. If you are connecting via Remote Access, then macOS prevents you from clicking Allow.
3) Restart. |
| |
|
974 |
| Can I get increased performance from Link Aggregation in macOS? | Dec-22-19 |
|
993 |
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
| Go to System Preferences...Network.
Select the 10GbE port and click "Advanced..."
Select the Hardware tab.
If Jumbo packets are on, turn them off, click OK and click Apply.
If that fixes the problem, then stay at Standard (1500), or check the Jumbo packet setting of every switch and device in the path.
If that doesn't fix the problem, check Flow Control.
If Flow Control is off, turn it on; or if it is on, turn it off. Not all devices support flow control, or the absence of flow control. |
| |
|
994 |
| My Twin10G or Presto 10GbE is not working on macOS. | Dec-22-19 |
|
1053 |
| Microsoft Ending Support for Windows 7 | Apr-04-19 |
|
1065 |
| I'm getting very slow performance with my Presto 10G PCIe card or Twin10G Thunderbolt 10G adapter with OS X 10.11-10.12. | Dec-22-19 |
|
1067 |
| How and when to use two Ethernet ports on a Mac | May-16-22 |
|
1152 |
| Does the Twin10G Thunderbolt Adapters or Presto 10GbE PCIe cards support NIC Teaming under Windows? | May-28-21 |
| |
