| ID | | Article Title | Post Date |
|
808 | 
| What 10GBase-T switches and PCIe cards has Sonnet tested for interoperability? | Dec-22-19 |
|
809 | 
| What reasonably-priced 10GBASE-T switches can Sonnet recommend? | Dec-22-19 |
| Sonnet has found the 10GBASE-T NETGEAR ProSAFE XS708E 8-port, and ProSAFE XS712T 12-Port 10-Gigabit Smart Switches to be a cost-effective, yet high-performance switches. They supports comprehensive networking features such as VLAN, QoS, IGMP and MLD snooping, L2+ Static Routing, Link Aggregation, ACL, and IPv6 management. The ProSAFE series has an easy-to-use web management GUI, and can be daisy-chained for expansion. |
| |
|
814 |
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
972 |
| After I upgraded macOS, the Twin10G, Presto 10GbE, or other Sonnet PCIe card that requires a driver is not loading. | Dec-22-19 |
|
974 |
| Can I get increased performance from Link Aggregation in macOS? | Dec-22-19 |
|
993 |
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
|
994 |
| My Twin10G or Presto 10GbE is not working on macOS. | Dec-22-19 |
| Check to see whether the driver is loading.
From the Apple Menu, select "About this Mac".
Click "System Report..."
On the left, under Hardware, select "PCI".
At the top, is "Driver Installed" Yes or No?
If No, and you haven't installed the driver, download, install, and authorize it now.
Restart.
If No, and you have installed the driver, you need to authorize the driver.
Restart, which forces macOS to scan for unloaded drivers.
Go to System Preferences...Security & Privacy panel...General tab. You will see a message, "System software from developer "Sonnet Technologies" was blocked from loading." Click Allow. Note that you must have a hard-wired or Bluetooth mouse/trackpad to click allow. If you are connecting via Remote Access, macOS prevents you from clicking Allow.
Restart.
If Yes, on the left under Hardware, select "Ethernet Cards".
At the top, there should be two card ports labeled "ethernet". Select one of them.
In the info below, check the version number. Is it current? (1.7.2 as of Dec 2019)
If not current, download, install, and authorize the current driver.
Restart.
If current, your preferences may be corrupt...
1) Go to System Preference..."Network".
2) Record your Network setups.
3) Select: Locations: Edit Locations.
4) Select each location except Automatic and click "-" to delete.
5) Click Apply.
6) Delete each of your 10GbE Network Ports by selecting each of them and clicking "-".
7) When you see the dialog box asking if you would like the controllers to return, click No.
8) Click Apply.
9) Click + to add your 10GbE networks connections.
10) Set them up from your notes.
11) Click Apply.
12) Wait five minutes for the system to refresh the settings.
If that doesn't work, delete the following two files with the terminal commands:
sudo rm /Library/Preferences/SystemConfiguration/NetworkPreferences.plist
sudo rm /Library/Preferences/SystemConfiguration/preferences.plist
Restart and recreate your network settings.
If that doesn't work, contact support@sonnettech.com. Be sure to save and send a System Report. |
| |
|
1053 |
| Microsoft Ending Support for Windows 7 | Apr-04-19 |
|
1065 |
| I'm getting very slow performance with my Presto 10G PCIe card or Twin10G Thunderbolt 10G adapter with OS X 10.11-10.12. | Dec-22-19 |
| In macOS 10.11 and 10.12, SMB signing is turned on by default. This is no problem for gigabit ethernet, but SMB Signing severely limits the performance of 10 gigabit ethernet. Apple has published a tech note how to turn off SMB signing: "Turn off packet signing for SMB 2 and SMB 3 connections". This note requires the use of the terminal application and a number of terminal commands, so some familiarity with those tools is required.
In macOS 10.13.6+, Apple has turned off SMB signing by default. |
| |
|
1067 |
| How and when to use two Ethernet ports on a Mac | May-16-22 |
|
1152 |
| Does the Twin10G Thunderbolt Adapters or Presto 10GbE PCIe cards support NIC Teaming under Windows? | May-28-21 |
| NIC Teaming is available in all editions of Windows Server starting with Windows Server 2012. Windows 10 supports NIC Teaming with the installation of Intel Advanced Network Services (ANS). |
| |
| |
