| ID | | Article Title | Post Date |
|
108 | 
| FireWire 800 ExpressCard/34 will not see a device on a MacBook Pro under Mac OS X Version 10.5+. | Dec-21-11 |
|
394 | 
| After waking from sleep, my Macintosh will give me a "Device Removal" error for a USB storage device. Why? | Aug-19-09 |
| This is an issue with Mac OS X and all PCIe USB cards connected to a storage device in a Mac Pro or PowerMac G5. This applies to the USB ports in the Sonnet Tango FireWire/USB PCIe, Tango FireWire 800/USB PCIe and Allegro Express USB 2.0 cards. Sonnet has notified Apple, who has declined to address this issue at this time. |
| |
|
396 |
| What's the difference between the Tango FireWire 800/USB 2.0 Express, #FW8USB2-E; and Tango FireWire 800/USB 2.0 PCIe, #FW8USB2A-E? | Oct-12-09 |
| #FW8USB2-E (now obsolete) had two external FireWire 800 ports and two USB 2.0 ports. #FW8USB2A-E (current version) has three external FireWire800 ports and two USB 2.0 ports. #FW8USB2A-E also uses a higher-performance Texas Instruments FireWire 800 controller, which translates into up to 42% higher bandwidth to fast hard drives and other FireWire devices. |
| |
|
712 |
| I own a LYNX Aurora 16VT with LT-USB-interface and I the sound is distorted when I connect to a Tango USB port in a Mac Pro. | Oct-10-12 |
| If you have this peripheral device, connect it to a built-in USB port and it will function correctly. |
| |
|
817 |
| Storage connected to a USB 3 PCIe card (or Tango combo card) gives an macOS error message upon wake from sleep. | May-12-20 |
|
997 |
| I have installed my FireWire card in a Windows computer, but it is not working. What do I do? | Feb-10-18 |
| If the FireWire card doesn't function after it has been physically installed in the computer, try the legacy FireWire driver. To install the legacy driver, complete the following:
Press the Windows key + R.
Enter devmgmt.msc.
Click OK.
In Device Manager, expand IEEE 1394 Bus host controllers.
Right-click on 1394 OHCI Compliant Host Controller.
Click Update Driver Software.
Click Browse my computer for driver software.
Click Let me pick from a list of device drivers on my computer.
Click 1394 OHCI Compliant Host Controller (Legacy).
Click Next.
When Windows has finished installing the driver, click Close. |
| |
| |
